Industrial cleaning in Missouri starts by looking up
Wash Authority handles industrial cleaning and warehouse cleaning in Missouri from our base in Jefferson City. The core of the job is high dusting, which takes settled dust off rafters, beams, racking and overhead systems before it falls on your product.
- What it is: high dusting and warehouse cleaning, worked from the rafters down.
- What we clean: rafters, ceilings, beams, racking tops, duct, pipe, conduit, lights and fans.
- Who it is for: warehouse, plant and facility managers with dust above normal reach.
- When to book: when the floor is quiet, or around your shifts if operations keep running.
- How to get a bid: send the building height, floor area and what hangs overhead.
What industrial cleaning and high dusting cover
High dusting removes settled dust from everything above normal reach. We work from the top down, so falling dust never lands on a floor we already cleaned.
| Area | Why it matters |
|---|---|
| Roof deck underside and rafters | It is the biggest surface, so it is the biggest source of falling dust. |
| Trusses and beams | Door slams, fans and forklifts shake the structure, so the dust lets go. |
| Light fixtures | Film on the lens cuts the light, so the fixture puts out less. |
| Fans and unit heaters | Moving air carries the dust right back into the building. |
| Duct, pipe, conduit and sprinkler lines | Nobody sees the tops from the floor, so nothing cleans them by accident. |
| Racking tops and uprights | When it falls, it lands on the product stored below. |
Missouri adds its own load. Pollen and fall leaves blow in through open dock doors, and humid summers keep dust damp and clinging, from Jefferson City to Fulton and Sedalia.
Floor cleaning inside the building is its own line item, and it always comes last.
What we need to know to bid industrial cleaning
Send what you know through the online bid form. Photos from the floor also help, and blanks are fine.
- Building heightEave, peak and clear height under the lowest beam.
- Floor areaSquare footage, plus whether it is one open bay or several rooms.
- What hangs overheadRafters, duct, pipe, conduit, lights and fans.
- Lift accessDoor sizes, aisle widths and anything that blocks a lift.
- OperationsWhether the building is running, paused or empty, and which shifts.
- Floor typeBare, sealed or coated concrete, tile or something else.
- What sits belowProduct or machines that cannot take dust or water.
- Timing and site rulesWhen we can have the building, plus any badge or gear rules.
Safety and lift access for high dusting
- Lift access. Tall work gets a plan before anyone leaves the ground, and lift rental is an add-on for tall work.
- People below. If your crew works underneath, we set timing, zones and coverings with you first.
- Site rules. We also settle orientation, badges and protective gear before day one.
- Coverage. We are fully insured with workers' compensation. Plus, a certificate of insurance is available on request for commercial clients.
- Safety paperwork. If you need specific documents, send the requirement and you get a plain answer.
Other commercial cleaning you can add to an industrial job
Each one is a separate line, so you approve only the parts you want.
- Dock aprons and drive lanes. Commercial pressure washing, with hot water pressure washing for the oil.
- Exterior walls. Commercial building washing for the outside of the building.
- Flat roofs. Rooftop debris removal, plus TPO or EPDM flat roof cleaning.
- A brand-new building. Post construction cleaning, done in phases before turnover.
Questions about high dusting and warehouse cleaning
Send us the building. We will look up.
Tell us how tall it is and what hangs overhead, and that is enough to start a bid.
Monday to Friday, 8 AM to 5 PM