Hot Water Pressure Washing in Jefferson City: The Right Wash for Each Surface
Hot water pressure washing in Jefferson City, MO pulls oil, grease and growth out of concrete. For siding, roofs and wood, we switch to a soft wash.
Hot water pressure washing at a glance
- What it is: water over 235 degrees from our own custom-built skids.
- What is included: our own cleansers plus hot water on every hard surface you list.
- Who it is for: driveways, garage floors, pavers, docks and lots.
- When to book: when cold water leaves oil or growth behind, or before you seal.
- How to get a quote: list your surfaces on the bid form, or call or text (573) 418-9942.
Which wash fits which surface
Find your surface in the left column. Then the shaded cell shows the wash we use.
| Surface | Cold pressure washing | Hot water wash | Soft wash |
|---|---|---|---|
| Driveways, garage floors and patios | Dirt only | Our pick Heat lifts oil and growth, so it is our standard for concrete cleaning. |
Too gentle |
| Paver walks and patios | Blows out sand | Our pick Cleans the pavers, and then the joints can take polymeric sand. |
No lift |
| Lake docks and boat slips | Growth stays | Our pick Because it uses little to no soap, it is our method for dock cleaning. |
Needs cleanser |
| Lots, dumpster pads and loading docks | No lift | Our pick Cuts grease, so it is the core of commercial pressure washing. |
Not needed |
| Brick, stone and siding | Too harsh | Not used | Our pick Part of every house washing job. |
| Roofs and wood decks | Never | Never | Our pick The only way we do roof cleaning and deck cleaning. |
| Light dust or pollen on clean concrete | Our pick Plain water is enough. |
Overkill | Not needed |
When we pick hot water
We ask three questions in order.
- Is it a wall, a roof or finished wood? Then we soft wash with low pressure and our own cleansers.
- Is there oil, grease or growth in a hard surface? Then we use hot water. The same goes for concrete that will get sealer next.
- Is it only loose dirt or pollen? Then cold water is enough, so we skip the heat.
Mixed jobs are normal. For example, one visit can mean soft wash on the siding and hot water on the driveway. Your estimate lists which wash goes where.
Our custom-built hot water skids
We build our own hot water skids. The water runs over 235 degrees, and we pair it with our own formulated cleansers.
Heat thins oil and grease and loosens growth. So the rinse carries off soiling, most oils and small debris.
Since 2013, our crews have finished 1,300+ hot water jobs. The skids go to driveways in Jefferson City and Fulton, rentals in Columbia, and docks at Lake Ozark and Osage Beach. We also offer reclamation washing for specialty jobs.
Steam off a garage floor, and a hot water wash inside a big commercial space.
Services that start with hot water
- Concrete cleaningIf your driveway has oil, rust or algae stains.
- Concrete sealingWhen you want a clean slab to stay clean.
- Masonry sealingWhen brick, stone or block turns white.
- Polymeric sandWhen paver joints wash out or grow weeds.
- Commercial pressure washingWhen you manage a lot, a pad or a drive-through.
- Dock cleaningIf your dock at the lake turns slick.
Questions about washing with hot water
Tell Us the Surface. We'll Pick the Wash.
Name what you want clean, what is on it and where it is. Then we match the wash to every surface.